Steps To Follow When Replacing Your Springs

When you want to replace your garage door springs, you need to ensure that you are very careful. It is the springs that are responsible for holding up the garage doors and so you have to be careful while handling them so that you do not cause an accident which will be fatal because of the huge weight of garage doors. There are two types of springs that are used for garage doors in Wheaton. There are the torsion springs and the extension garage door springs.  It does not matter what type of springs you are dealing with. If you decide that you do not want to call a garage door company to do the work for you, you have to be very careful while dealing with garage door springs.

Check the springs regularly

Because of the weight that they carry, garage door springs will wear out at one point. They can also break or be damaged in one way or another. You have to ensure that you regularly check the springs to see if they are okay so that you can catch damages before they can get worse. Do repairs as soon as possible.

Get the correct length springs

The length of the springs should be correct. You should check every store in Illinois if need be so that you can get the correct length of springs. You have to ensure that you buy new springs that are of the same length as the old ones. Garage door torsion spring replacement is something that should be done with utmost care. The springs that are to be placed on the right side should have a wire that coils from the right side and the left springs should also have a wire that coils from the left side.

Replacing the springs

As you are taking off the old springs from the garage door, you should ensure that the winding cone is supported so that it can prevent any accidents. If you are not sure about yourself, it is still not too late to look for a garage door company to do the work for you. You should ensure that you unwind the coil properly and take it off as soon as the spring is loose. The new spring should not be hard for you to replace. It is very important that once you have placed the new spring, you check to see if the wire on every spring is tight enough so that you are sure that everything is okay.